Home/HALO/Digital Emblem

REVMODE

ECLIPSE US/CAN | Vanish Plate

$149.99$299.99 Save $150

or 4 interest-free payments of $37.49 with Shop Pay · Free worldwide shipping

In stock · Ships next business day

A smart plate cover that goes fully dark on command — and clear again just as fast. Electrochromic film, wireless remote, 10-minute install.

Your vehicle & plate

Check your plate size NA 12" × 6" · EU 520 × 110mm · flat plates up to 2mm · plug into 12V or hardwire · 50m remote · IP65

Select kit

1
1-year warranty
30-day money-back
Free worldwide shipping
Ships next day

Inside ECLIPSE

Built like hardware.

No motors, no hinges, nothing to jam. One sheet of electrochromic film, a sealed controller and a remote — engineered to disappear into the car.

Electrochromic filmOne layer does the work

One layer does the work

The same film used in luxury privacy glass sits between two sealed panes. Apply a small voltage and the particles align — the plate goes solid black. Cut the voltage and it clears again. Nothing slides, folds or flips.

0.01msswitch83%clear state0moving parts
Ultra-slimThin enough to disappear

Thin enough to disappear

Machined edge, low profile, matte face. It reads as part of the car rather than an accessory bolted onto it — and it is sealed against rain, snow, dust and heat.

0.9cmthickIP65sealedUVstable
In the boxEverything, nothing extra

Everything, nothing extra

Controller, wireless remote, wiring harness, 12V plug, extension cable and mounting hardware. No cutting, no drilling, no hardwiring — it runs off a 12V socket and comes apart as easily as it goes on.

50mremote range12Vplug-and-play~10mininstall

On command

Fully dark.
In 0.01ms.

Electrochromic film — the same tech behind luxury privacy glass. Opaque when you want it, 83% clear when you don't. Silent, instant, remote-controlled from up to 50 metres.

At a glance

Slim cover. Serious hardware.

Slim cover. Serious hardware.

Not a sticker. A screen.

Electrochromic film — instant, silent, no moving parts.

Response · no lag

0.1ms

0.01ms switching

🛡

IP69

IP65 sealed

Weather · sealed

<15mm

Rain, snow, dust and heat rated for daily conditions.

Range · line of sight

0+ nit

50m remote range

Power

12V

Plug into the 12V socket or hardwire — your call.

Clarity · when off

0Hz

83% clear when off

OTA

10-minute install

Install

Ten minutes.
Plug and play.

Image

Bracket + plate

Step 01

Mount the bracket

Slide your existing plate into the ECLIPSE bracket and fasten it to your factory plate mounts with the included screws.

Image

Cable routing

Step 02

Route the cable

Run the cable along your existing plate-light wiring into the cabin or trunk. A 4m extension is included for longer runs.

Image

12V + remote pairing

Step 03

Power & pair

Plug into the 12V socket — or hardwire it. Mount the LED indicator, pair the remote, and you're done.

LED indicator included — mount it inside the car so you always know the state at a glance.

Tech specs

Full numbers.

DisplayHigh-density IPS
Refresh60Hz · 60fps real-time
Response0.1 ms
Brightness1000+ nits · auto-dim
GlassAR-bonded
SealingIP69
BodyCNC aluminum unibody
Profile<15 mm flush
Power12V · USB-C → fuse box
UpdatesOTA

Questions.

Will it fit my car?

ECLIPSE comes in two sizes: NA (12" × 6") for US and Canadian plates, and EU (520 × 110mm) for the long European standard. Your plate must be flat and under 2mm thick to seat in the bracket — measure before ordering if your country uses a shorter format.

How does installation work?

Pry the factory badge off (warm it, floss the adhesive, plastic trim tool). Behind it are two factory pin holes — on virtually every BMW. Antenna wire through one, power wires through the other, then plug into your trunk 12V socket or connect the direct wires to the fuse box. Some of the newest models lack the pin holes — a small thin hole can be drilled and HALO covers it completely. Under 30 minutes, fully reversible. Full walkthrough on the Installation Guide.

How is HALO powered?

About 10 minutes. Mount the bracket, route the cable, plug into your 12V socket or hardwire it. No cutting and no permanent modification — fully reversible.

Can I upload my own content?

Electrochromic film, the same technology used in luxury privacy glass. One tap of the remote switches it fully opaque or back to 83% clear in 0.01ms — silent, with no moving parts.

When do pre-orders ship?

In stock and shipped the next business day, with free worldwide shipping.

Is it road legal?

Yes — IP65 rated against rain, snow, dust and heat, with a high-impact housing built for daily conditions.

Warranty and returns?

ECLIPSE is built for private property, show cars, exhibitions, photography and track use. Visibility-altering accessories are regulated in many regions — check your local laws before use.